Water well drilling and pump installation operations

No one drills a well or sets a pump on a lapsed registration.

Drilling a water well and installing the pump in it are registered work, and the registration that makes them legal runs out on a date nobody watches. CrewOS checks the driller or pump installer is current before they can clock in, so a lapse stops the job at the rig instead of turning up when the well record is reviewed.

Over the shoulder of a well driller beside a drilling rig on a rural property, reading a tablet that shows the CrewOS compliance board tracking each driller's and pump installer's registration and its expiry
The expensive failure

Four wells drilled after the licence ran out, and no well records filed.

The contractor and technician licences lapsed and the crew kept drilling. The wells went in, the water ran, the customers paid. Then the well records the regulator requires never arrived, someone asked who built those wells, and the answer was a crew that was not licensed to build them. It is a real Ontario conviction, and it started the day the first rig set up on an expired licence.

What it costs

An unregistered well is a regulator's file and a homeowner's drinking water.

Building or altering a well without the registration is an offence on its own, fines run into the tens of thousands, and a court can bar you from drilling. The well itself is the bigger problem: a casing, a seal, or a pump set by someone who was not qualified to set it is a pathway for contamination into a family's water supply, and every well you built in that window is a question you now have to answer.

A water well driller at the controls of a truck-mounted drilling rig on a rural property, steel casing racked beside the rig and the mast raised over the borehole
A well that someone will drink from for the next forty years.
Operator control

The clock-in gate is yours to set, registration by registration.

You decide what gets checked, on which jobs, and how hard the system holds the line.

app.crewos.ca/settings
The switch is yours. On the Registered Well Driller (BC) document type you turn on "required for clock-in" and choose whether a lapsed registration warns or hard-blocks. Set it once, and the gate is live for every crew member who must hold it.
You decide which registrations gate the clock-in and how hard the line holds.The switch is yours. On the Registered Well Driller (BC) document type you turn on "required for clock-in" and choose whether a lapsed registration warns or hard-blocks. Set it once, and the gate is live for every crew member who must hold it.
What the system will not let happen

The registration is tied to the person, and checked before the clock-in.

  1. 1In the compliance catalogue you mark the well driller and pump installer registrations as required for clock-in, and you assign each one to the drillers and installers who must hold it.
  2. 2Every driller's and installer's registration carries its own expiry date, and CrewOS counts it down on the compliance board, so a registration weeks from lapsing is visible while you can still renew it or move the job.
  3. 3When a crew member whose required registration has lapsed taps Clock In, the clock-in is refused at the rig. Once the well is built, the disinfection and yield test is filed from the well site, dated and attributed to the registered crew member who ran it.
Real product, real screens

See it happen.

The driller is at the well site and taps Clock In. CrewOS refuses it: Clock-in Blocked, Compliance Issue, because the Registered Well Driller (BC) registration that driller must hold expired on 2026-11-01. This dialog is what the driller gets, in place of a started job.
Not a reminder, a stop. A lapsed registration cannot satisfy the gate, so the rig does not start on it.The driller is at the well site and taps Clock In. CrewOS refuses it: Clock-in Blocked, Compliance Issue, because the Registered Well Driller (BC) registration that driller must hold expired on 2026-11-01. This dialog is what the driller gets, in place of a started job.
app.crewos.ca/forms
A real disinfection and yield test record, filed from the well site: the chlorine dose and contact time, the flush, the pumping rate, the duration and the drawdown, by a registered crew member.
The test that has to happen before the well goes into use, on the record the day it was run.A real disinfection and yield test record, filed from the well site: the chlorine dose and contact time, the flush, the pumping rate, the duration and the drawdown, by a registered crew member.
The direct answer

Can CrewOS stop a well driller or pump installer with a lapsed registration from clocking in?

Yes, where that registration is set as required for clock-in. CrewOS checks the driller's or pump installer's registration is current before they can clock in. A lapsed or missing registration is not current, so the clock-in is blocked until it is renewed.

The requirement is set once per document type in the compliance catalogue, assigned to the crew members who must hold it, and read from the registration's own expiry date. A registration that lapses over the weekend blocks Monday's clock-in without anyone re-checking.

The outcome

Every well in the ground was built by someone registered to build it.

The check runs on every well job, not only when the office thinks to look. Your drillers and installers stay registered, every disinfection and yield test is on file from the day it ran, and the well a regulator or a buyer's lender asks about has a record that answers.

One platform, your words

Configured in Water Well Drilling & Pump terms, out of the box.

Crew memberTechnician
SiteWell Site
ShiftJob
QuoteEstimate
Clock inStart Job
Required documentRegistered Well Driller (BC)
Questions

What operators ask before they switch.

Our drillers and pump installers hold different registrations. Can the gate tell them apart?
Yes. Each registration is its own document type with its own clock-in rule, and you assign it to the people who must hold it. Drillers are checked against the drilling registration and installers against the pump installer registration, each on their own record.
Does every registration block clock-in, or only the ones I choose?
Only the ones you choose. Each document type in the compliance catalogue carries its own clock-in gate rule, so you decide which registrations are hard requirements for clock-in and which are simply tracked.
We work under supervision rules for helpers and apprentices. Does the gate break that?
No. The gate only checks the registrations you require of each person. You require the registration of your registered drillers, and a helper working under their supervision is not held to it, so the crew runs the way your regulator allows.
Can the crew file the disinfection and yield test from the well site?
Yes. The test record is a form you build, with the fields your province or state asks for, and the crew files it from the well site on their phone. It lands dated and attributed to the person who ran it.

Run your crew like you've got it together. Because now you do.

Set up your first site in an afternoon. Get your one month free trial of Pro. No credit card.